|
Patty Lindbloom
Jewelry
I have created these jewelry pieces using porcelain clay and sterling silver. Each piece of porcelain is hand formed and painted with ceramic oxides. These porcelain “stones” are then fired in a kiln to a temperature of 2300 ? F, at which point the clay has matured and is extremely durable.
I then create a custom silver setting to fit each ceramic stone. I primarily use sterling silver and a variety of techniques, including roller printing, hammering, drilling, sawing, and soldering. On most pieces I use a durable black patina and then remove the patina in certain areas to provide additional interest to the piece.
When designing this jewelry I envision a low maintenance line of work that requires minimal care. These pieces have been given a rugged look, and they will age by darkening in certain places and lightening in others. This aging process is intended and the pieces will look better with wear. This work can be cleaned by gently rubbing with a soft cloth using soap and water.
|
